Front Mount Intercooler Piping Pipe Tube Bov Kit For Nissan S13 S14 240SX with RB20/RB25DET Engine
- $544.55
- Item Code: KIT-RB-STOCKTB-IC0048
- Availability: In Stock
Available Options
|
Qty:
|
|
CXRacing Front Mount Intercooler Pipe Tube Kit For Nissan S13 S14 240SX with RB20/RB25DET Engine
With Factory Intake Manifold and Factory Turbo
Piping Kit Runs on the Opposed Side. (Can Use the Same Intercooler If Change to Intake Manifold Later, Save Intercooler Investment)
Application:
Chassis: Nissan S13 S14 240SX
Products Being Sold:
Intercooler + Piping + Silicon Hose + T-Clamp + BOV
This is CXRacing's New Kit for RB, Complete Aluminum Pipes Replace ALL Factory Pipes, Including the Factory Restrictive Cast Charge Pipe and BOV.
Product Info and Spec:
Intercooler:
Core Size: 23"x11"x3"
Overall Size: 30"x11"x3"
2.75" Inlet & Outlet
3" Thick core, Bar and Plate Design
Piping Kit:
2.5" Mandrel Bent Aluminum Pipe
Comes with BOV, Silicon Hoses, and T-Bolt Clamps
Click Below Picture to See Flowbench Test:
Highlights:
-Built-in Mounting Bracket on Intercooler for Easy Install
-All Aluminum Polished 2.0mm Thick Pipes All the Way, Matching Intercooler Inlet and Outlet Size, Provides the Best Air Flow from Turbo to Throttle Body.
-Includes All Silicon Hoses and Stainless Steel T-Clamps for ALL Joints. Many of Other Kits Only Provide Partial QTY of Hoses and Cheap Clamps to Lower Costs.
Items Included:
31"x11"x3" Bar & Plate Aluminum Intercooler,2.75" Inlet & Outlet, 3" Thickness Core
2.5" Mandrel Bent Aluminum Pipes
Silicon Hoses and Stainless Steel T-Clamps
BOV
With Factory Intake Manifold and Factory Turbo
Piping Kit Runs on the Opposed Side. (Can Use the Same Intercooler If Change to Intake Manifold Later, Save Intercooler Investment)
Application:
Chassis: Nissan S13 S14 240SX
Products Being Sold:
Intercooler + Piping + Silicon Hose + T-Clamp + BOV
This is CXRacing's New Kit for RB, Complete Aluminum Pipes Replace ALL Factory Pipes, Including the Factory Restrictive Cast Charge Pipe and BOV.
Product Info and Spec:
Intercooler:
Core Size: 23"x11"x3"
Overall Size: 30"x11"x3"
2.75" Inlet & Outlet
3" Thick core, Bar and Plate Design
Piping Kit:
2.5" Mandrel Bent Aluminum Pipe
Comes with BOV, Silicon Hoses, and T-Bolt Clamps
Click Below Picture to See Flowbench Test:
Highlights:
-Built-in Mounting Bracket on Intercooler for Easy Install
-All Aluminum Polished 2.0mm Thick Pipes All the Way, Matching Intercooler Inlet and Outlet Size, Provides the Best Air Flow from Turbo to Throttle Body.
-Includes All Silicon Hoses and Stainless Steel T-Clamps for ALL Joints. Many of Other Kits Only Provide Partial QTY of Hoses and Cheap Clamps to Lower Costs.
Items Included:
31"x11"x3" Bar & Plate Aluminum Intercooler,2.75" Inlet & Outlet, 3" Thickness Core
2.5" Mandrel Bent Aluminum Pipes
Silicon Hoses and Stainless Steel T-Clamps
BOV
Below Are Installation Pictures:
