Front Mount Intercooler Piping Pipe Tube Radiator Oil Cooler Kit For RX7 SA FB 13B RX-7 Turbo
- $862.73
- Item Code: KIT-13B-RX7FB-STOCK-IC-OC-RAD
- Availability: In Stock
Available Options
|
Qty:
|
|
CXRacing Front Mount Intercooler Pipe Tube Kit + Radiator Kit + Oil Cooler Kit For:
1978-1985 Mazda RX-7 SA/FA/FB Series 1, 2, 3 With FC/FD 13B Turbo Motor Swap, with Stock 13B Twin Turbo.
These Are Brand New Developments By CXRacing, Replace Stock Parts With Larger And Better Upgraded Products, Dramatically Increase Performance, And Offer Beautiful Professional Looks.
Note:
1. This Intercooler Kit Is For 13B Stock Twin Turbo, Does NOT Fit Single Upgrade Turbo Setup.
2. Turbo, Wastegate, Manifold, Downpipe Shown on Some Installed Pictures Are NOT Included. We Offer Them with Other Kits Separately, Please Check Our Website.
Products Being Sold:
Intercooler + Piping Kit + Radiator Kit + Oil Cooler Kit
Note: There Are Many Installed Products Shown On Car Pictures, NOT ALL of Them Are Included. Only The Specific Items Listed On "Items Included" Below Are Being Sold with This Item.
Application:
Chassis: 1978-1985 Mazda RX-7 SA/FA/FB
Engine: 13B Turbo Motor From FC or FD (With Original 12A Front Cover) Swap
Turbo: Stock Twin Turbo
Product Info and Spec:
Intercooler Piping Kit:
25"x11.75"x3" Overall Intercooler, with 3" Inlet and Outlet
Comes with Mounting Bracket, Bolt On Fit to Chassis
3" Mandrel Bent Piping Kit
3" Aluminum Cast Intake Elbow
50mm BOV
Note: Need to Drill or Open Two Holes On Front Radiator Support Assembly Panel To Run Piping Kit. See Pictures.
Radiator:
Full Aluminum Racing Radiator
Mount to Existing Factory Radiator Mount
1.5" Aluminum Radiator Hard Pipe Kit, with Silicon Hoses
With Filler Tank
Note: Need to Drill Mounting Holes on Radiator Bracket to Match to Factory Radiator Mounting Plate. Car Is So Old, Might Have Changed Over Time. So We Don't Pre-Drill Mounting Holes On the Radiator Mounting Plate on Both Sides.
Oil Cooler:
22x5.5x2.5 Inch Big Oil Cooler
AN10 Oil Fitting Ports
Comes With Mounting Brackets Bolt To Radiator
Comes With Oil Fitting To/From Engine
Note: Oil Return Is for Original 12A Front Cover Oil Return Port
This is CXRacing's Newest Products For 1st Gen RX-7. All Parts Are Developed From Ground Up, Designed and Built Specially For the SA/FA/FB. It is One of The Most Complete Kits Available With The Most Competitive Cost. Kit is Easy Fit and Install, Super Clean and Nice Looking, Show Car Quality.
Notes:
Off Road Or Track Use ONLY, NOT For Street Use
Due To The Complexity Of Swapping A Motor To Different Chassis, Please Make Sure That You Understand The Application Stated Here Are The Right Parts For Your Project.
Parts Being Sold Are The Kit Being Advertised ONLY. Other Parts Shown On Pictures Are For Demo Only (Of Our Complete Swap Kit).
Click Below Picture to See Flowbench Test:
Highlights:
Especially Designed, Made for the Application Stated
Fully Tested, Simple Easy Installation
Offers Excellent Performance Gains
Items Included:
Engine Oil Cooler and Oil Line Kit
Radiator, Hard Piping Kit, and Filler Tank
Intercooler, Piping Kit, and BOV
Hoses and Clamps
1978-1985 Mazda RX-7 SA/FA/FB Series 1, 2, 3 With FC/FD 13B Turbo Motor Swap, with Stock 13B Twin Turbo.
These Are Brand New Developments By CXRacing, Replace Stock Parts With Larger And Better Upgraded Products, Dramatically Increase Performance, And Offer Beautiful Professional Looks.
Note:
1. This Intercooler Kit Is For 13B Stock Twin Turbo, Does NOT Fit Single Upgrade Turbo Setup.
2. Turbo, Wastegate, Manifold, Downpipe Shown on Some Installed Pictures Are NOT Included. We Offer Them with Other Kits Separately, Please Check Our Website.
Products Being Sold:
Intercooler + Piping Kit + Radiator Kit + Oil Cooler Kit
Note: There Are Many Installed Products Shown On Car Pictures, NOT ALL of Them Are Included. Only The Specific Items Listed On "Items Included" Below Are Being Sold with This Item.
Application:
Chassis: 1978-1985 Mazda RX-7 SA/FA/FB
Engine: 13B Turbo Motor From FC or FD (With Original 12A Front Cover) Swap
Turbo: Stock Twin Turbo
Product Info and Spec:
Intercooler Piping Kit:
25"x11.75"x3" Overall Intercooler, with 3" Inlet and Outlet
Comes with Mounting Bracket, Bolt On Fit to Chassis
3" Mandrel Bent Piping Kit
3" Aluminum Cast Intake Elbow
50mm BOV
Note: Need to Drill or Open Two Holes On Front Radiator Support Assembly Panel To Run Piping Kit. See Pictures.
Radiator:
Full Aluminum Racing Radiator
Mount to Existing Factory Radiator Mount
1.5" Aluminum Radiator Hard Pipe Kit, with Silicon Hoses
With Filler Tank
Note: Need to Drill Mounting Holes on Radiator Bracket to Match to Factory Radiator Mounting Plate. Car Is So Old, Might Have Changed Over Time. So We Don't Pre-Drill Mounting Holes On the Radiator Mounting Plate on Both Sides.
Oil Cooler:
22x5.5x2.5 Inch Big Oil Cooler
AN10 Oil Fitting Ports
Comes With Mounting Brackets Bolt To Radiator
Comes With Oil Fitting To/From Engine
Note: Oil Return Is for Original 12A Front Cover Oil Return Port
This is CXRacing's Newest Products For 1st Gen RX-7. All Parts Are Developed From Ground Up, Designed and Built Specially For the SA/FA/FB. It is One of The Most Complete Kits Available With The Most Competitive Cost. Kit is Easy Fit and Install, Super Clean and Nice Looking, Show Car Quality.
Notes:
Off Road Or Track Use ONLY, NOT For Street Use
Due To The Complexity Of Swapping A Motor To Different Chassis, Please Make Sure That You Understand The Application Stated Here Are The Right Parts For Your Project.
Parts Being Sold Are The Kit Being Advertised ONLY. Other Parts Shown On Pictures Are For Demo Only (Of Our Complete Swap Kit).
Click Below Picture to See Flowbench Test:
Highlights:
Especially Designed, Made for the Application Stated
Fully Tested, Simple Easy Installation
Offers Excellent Performance Gains
Items Included:
Engine Oil Cooler and Oil Line Kit
Radiator, Hard Piping Kit, and Filler Tank
Intercooler, Piping Kit, and BOV
Hoses and Clamps
Below Are Installation Pictures:
